Library RFID Products (High Frequency and Ultra High Frequency)

Lemonjar provide 2 types of Library RFID, which are High Frequency (HF) and Ultra High Frequency (UHF).

Please browse through our products below: –

UHF RFID Tag

Model: Impinj M4 H47 (Square)

With the Monza® 4 tag chips, Impinj builds upon the field-proven Monza chip family—well regarded in the industry as the most reliable, consistent, flexible, and fully UHF Gen 2- compliant tag chips available. The Monza 4 family provides a variety of models to suit diverse applications, including unique RFID privacy, tag orientation insensitivity, competitive and consistent read/write performance, and memory options optimized for use in manufacturing and supply chain industries.

    

Please contact us for more info and request for sample via sales@lemonjar.com.my.


Model: Alien Higgs 3 (Strip Type Double-sided Adhesive)

This is a strip-typed RFID tag which is suitable to hide at the spine of the books. The size of the tag is 104mm x 5mm. The tag can be detected by the RFID antenna in 3 meters (depends on the antenna and RFID reader with 27dBm). It is tested by Impinj R2000 with 5dBi antenna. This RFID tag is using Alien Higgs 3. Alien Higgs 3 is a highly integrated, 896-bit, single chip UHF RFID tag IC. The chips conform to the EPC Global Class 1 Gen 2 specifications and provides state-of-art performance for a broad range of applications.

The tags are able to be worked with any UHF RFID Class 1 Gen 2 equipment, such as RFID Desk, Self Check Kiosk, RFID Security Gate and etc.

Technical Specification:

Physical

  1. Material: Clear PET Double Sided Adhesive
  2. Size: 104mm x 5mm
  3. Thickness: 0.2mm
  4. Packing: 5,000/ roll
  5. Shelf Life: 2 Years

Environment 

  1. Operation Condition: -40 – 60 °C, 5-95% RH, No condensation.
  2. Storage Condition: -20 – 45 °C, 5-95% RH, No condensation.
  3. ESD: ± 2000V peak

Radio Frequency

  1. Protocol: EPC Global UHF Class 1 Gen 2, ISO18000-6c
  2. Frequency: 860MHz – 960MHz
  3. Chip: Alien Higgs 3
  4. Memory: Total Memory: 896 bits, User: 512 bits, EPC: 96bits. Please find the attached official technical from Alien.
  5. Reading Distance: 6 meters
  6. Write Endurance: 100,000 cycles
  7. Data Retention: 50 years
  8. Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info and request for sample via sales@lemonjar.com.my.

 

Please contact us for more info and request for sample via sales@lemonjar.com.my.


Model: ETE-UT-9629

This is a small square RFID tag which is suitable to stick on any printed material, CD and DVD media.. The size of the tag is 25.5mm x 25.5mm. The tag can be detected by the RFID antenna in 3 meters (depends on the antenna and RFID reader with 27dBm). It is tested by Impinj R2000 with 5dBi antenna. This RFID tag is using Alien Higgs 3. Alien Higgs 3 is a highly integrated, with EPC 96-bit, single chip UHF RFID tag IC. The chips conform to the EPC Global Class 1 Gen 2 specifications and provides state-of-art performance for a broad range of applications.

The tags are able to be worked with any UHF RFID Class 1 Gen 2 equipment, such as RFID Desk, Self Check Kiosk, RFID Security Gate and etc.

Technical Specification:

Physical 

  1. Material: Dry Inlay with single sided adhesive or wet inlay with single sided adhesive.
  2. Size: 25.5mm x 25.5mm
  3. Thickness: 0.2mm
  4. Packing: 5,000/ roll
  5. Shelf Life: 2 Years

Environment 

  1. Operation Condition: -40 – 60 °C, 5-95% RH, No condensation.
  2. Storage Condition: -20 – 45 °C, 5-95% RH, No condensation.
  3. ESD: ± 2000V peak

Radio Frequency

  1. Protocol: EPC Global UHF Class 1 Gen 2, ISO18000-6c
  2. Frequency: 860MHz – 960MHz
  3. Chip: Alien Higgs 3
  4. Memory: Total Memory: 896 bits, User: 512 bits, EPC: 96bits. Please find the attached official technical from Alien.
  5. Reading Distance: 3 – 3.5 meters
  6. Write Endurance: 100,000 cycles
  7. Data Retention: 50 years
  8. Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info and request for sample via sales@lemonjar.com.my.

RFID TAG (HF) – ICODE SLIX

The ICODE SLIX IC is a dedicated chip for intelligent label applications such as libraries, product authentication in different industries such as pharmaceutical, medical devices and alcohol, as well as production management in different areas of the industry. This IC is the third generation of a product family of smart label ICs based on the ISO standards ISO/IEC 15693 and ISO/IEC 18000-3, prolonging a successful story of NXP® in the field of vicinity identification systems.

The ICODE system offers the possibility of operating labels simultaneously in the field of the reader antenna (anti-collision). It is designed for long range applications.

Contactless energy and data transfer

Whenever connected to a very simple and easy-to-produce type of antenna (as a result of the 13.56 MHz carrier frequency) made out of a few windings printed, winded, etched, or punched coil, the ICODE SLIX IC can be operated without line of sight up to a distance of 90cm (security gate width). No battery is needed. When the smart label is positioned in the field of an interrogator antenna, the high-speed RF communication interface enables data to be transmitted up to 53 kbit/s.

Anti-collision

An intelligent anti-collision function enables several tags to operate in the field simultaneously. The anti-collision algorithm selects each tag individually and ensures that the execution of a transaction with a selected tag is performed correctly without data corruption resulting from other tags in the field.

Security and privacy aspects

  • Unique IDentifier (UID) – The UID cannot be altered and guarantees the uniqueness of each label.
  • Password protected EAS and AFI functionality – The 32-bit EAS/AFI password enables the addressed label to be set in a mode where the EAS status and the AFI value can only be changed if the correct EAS/AFI password is transmitted to the label within the mentioned commands.

Features: –

ICODE SLIX RF interface (ISO/IEC 15693)

  • Contactless transmission of data and supply energy (no battery needed)
  • Operating distance: up to 1.5 m (depending on antenna geometry)
  • Operating frequency: 13.56 MHz (ISM, world-wide license freely available)
  • Fast data transfer: up to 53 kbit/s
  • High data integrity: 16-bit CRC, framing
  • True anti-collision
  • Password protected Electronic Article Surveillance (EAS)
  • Password protected Application Family Identifier (AFI)
  • Data Storage Format IDentifier (DSFID)
  • Additional fast anti-collision read
  • Write distance equal to read distance

EEPROM

  • 1024 bits, organized in 32 blocks of 4 bytes each
  • 50 years data retention
  • Write endurance of 100000 cycles

Security

  • Unique identifier for each device
  • Lock mechanism for each user memory block (write protection)
  • Lock mechanism for DSFID, AFI, EAS
  • Password (32-bit) protected EAS and AFI functionality

Model: I-CODE2

  1. Material: Clear PET Adhesive, 80g Art Paper
  2. Size: 50mm x 50mm
  3. Reading Range: 2 – 10cm
  4. Antenna Thickness: 0.03mm
  5. Overall Physical Thickness: 0.2mm
  6. Packing: 1,000/ roll, 3,000/ roll, 5,000/ roll
  7. Adhesive Shelf Life: 2 Years

Please contact us for more info and request for sample via sales@lemonjar.com.my.


Model: XKIC9

  1. Material: Clear PET Adhesive, 80g Art Paper
  2. Size: Diameter 25mm
  3. Reading Range: 2 – 10cm
  4. Antenna Thickness: 0.03mm
  5. Overall Physical Thickness: 0.2mm
  6. Packing: 1,000/ roll, 3,000/ roll, 5,000/ roll
  7. Adhesive Shelf Life: 2 Years

Please contact us for more info and request for sample via sales@lemonjar.com.my.

UHF RFID Reader

Model: ETE-RF3000

                      

The UHF RFID Desk (Model No.: ETE-RF3000) is a new product from The Edge System series. It is tested and certified by SIRIM and MCMC Malaysia!

It is used to read the accession number of the books and activate/ deactivate the EAS bit. This desk is able to perform circulation transaction: check-in and check-out for books and collection in an effective method (RF method, without scanning using barcode scanner) and it is able to process (borrow, return and renew) several books per transaction (10 books).

In addition, it is also operate as the RFID tagging station, where librarian can perform barcode-to-RFID conversion towards UHF RFID tags. This workstation has been dedicated to build in handling the possible RF frequency interference so each item can be processed precisely in a quick and safe method during every single tagging process. And it should works with UHF RFID security gate system.

Technical Specification:

  1. Operating Voltage: 12V – 18V
  2. Standby Mode Current: <30mA
  3. Operating Current: 600mA +/-5% @ DC 12V Input
  4. Operating Temperature: -20°C – +55°C
  5. Storage Temperature: -20°C – +85°C
  6. Humidity: < 95% (+25°C)
  7. RFID Interface Protocol Supported: ISO 18000-6C EPC C1G2, ISO 18000-6B
  8. Radio Frequency Range: 919MHz – 923MHz (Malaysia), Adjustable Range (860Mhz – 960MHz) for Other Countries (Software Adjustable)
  9. Output Power: max 27dBm (Malaysia), 0 – 33dBm (Software Adjustable)
  10. Output Power Precision: ± 1dB
  11. Output Power Flatness: ± 0.2dB
  12. Receive Sensitivity: < -85dBm
  13. Reading Range: 5cm – 1m adjustable
  14. Peak Inventory Speed: > 700 tags/ sec
  15. Tag Buffer Capacity: 1000 tags @ 96bit EPC
  16. Interfaces: USB (COM) 115200 bps (8,N,1), TCP/IP
  17. 2 inputs optical coupling 2 outputs optical coupling
  18. Signal: Buzzer, LED
  19. Supported Region: All worldwide regions supported, including US, Canada, and other regions following US FCC 47 CFG CH.1 Part15, Europe and other regions following ETSI EN 302 208-1 (V1.4.1)
  20. Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info via sales@lemonjar.com.my.
  21. Software: Come with The Edge System – Workstation (linked with LMS via SIP2).
  22. Software: RFID Read/ Write SDK software provided.

Overall Technical Specification

  1. Dimension of Reader: 230mm(L) x 160mm(W) x 28mm(H)
  2. Dimension of Antenna: 301 x 301 x 8.5 mm
  3. Packing List: 327 x 306 x 105 mm, 3.5kg

What’s in the box?

A ETE-RF3000 Reader/ Writer, An EDGE-ANT30-TNC Antenna (RP-TNC), A Power Adapter, A GPIO Connector, A Network Cable, A Serial Cable, DVD Media with Software The Edge System – Workstation and SDK Software.

UHF RFID MODULE (4-CHANNEL) – To build your own UHF RFID device.

Impinj Indy R2000 Module, Model: M2800

This module is tested by SIRIM and certified by MCMC!

     

Product View: –

Module Type M2800
RF Channel Four channels
RF Connector SMA
Antenna Connection Mode Four antennas
Interface Connector Moles 53261-1571
RF Connector Material Gold-plated brass
PCB Material Rogers FR4 gold-plated
Shield Material Aluminium

If you want to request the technical paper, please contact to us via sales@lemonjar.com.my.

HF RFID Desk

Model: Tagsys Medio P200-LSA4

TAGSYS’ Medio™ P200 is a new generation packaged and cost-efficient 13.56 MHz RFID reader for proximity read/write applications. Its small size and affordable price makes it an ideal item-level tracking solution for most industrial applications.

This P200 is used to read the accession number of the books and activate/ deactivate the EAS bit. This desk is able to perform circulation transaction: check-in and check-out for books and collection in an effective method (RF method, without scanning using barcode scanner) and it is able to process (borrow, return and renew) several books per transaction (10 books).

In addition, it is also operate as the RFID tagging station, where librarian can perform barcode-to-RFID conversion towards HF RFID tags. This workstation has been dedicated to build in handling the possible RF frequency interference so each item can be processed precisely in a quick and safe method during every single tagging process. And it should works with HF RFID security gate system.

Technical Specification: Tagsys Medio P200

OPERATING FREQUENCY: 13.56 MHZ
PROTOCOLS SUPPORTED: NXP ICODE 1 (C270), ISO 15693/ISO 18000-3 Mode 1, TAGSYS C210, C240
RF OUTPUT POWER: 1W MAX
COMMUNICATION INTERFACE: P200u: USB
COMMUNICATION SPEED:Up to 115200 bps
ANTENNA CONNECTIONS: SMA
POWER SUPPLY: 12 VDC (included)
CERTIFICATIONS: CE, EN ETSI 300 330 (Emissions), EN ETSI 301 489 (Immunity), RoHS compliant
DIMENSIONS: P200u: 123 x 68 x 30 mm
OPERATING TEMPERATURE: 0°C to 50°C (32°F to 113°F)

Technical Specification: Antenna LSA4

FREQUENCY: 13.56 MHZ
RF MAX INPUT POWER: 1.2W
CABLE: 3 m (9.8 ft.) built in coaxial cable includes BNC connector
CERTIFICATIONS: IP21 CE, FCC, RoHS
EXTERNAL DIMENSIONS OF PACKAGED ANTENNA: 288 x 263 x 17 mm
OPERATING TEMPERATURE: 0°C to 40°C (32°F to 104°F)

If you want to request the technical paper, please contact to us via sales@lemonjar.com.my.

UHF RFID Security Gate System

Model: ETE-RFID-G81

The UHF RFID security gate system is used to detect the EAS bits of the books which are passing through the gates, the EAS bits’ configuration of the UHF tag can be altered. If the EAS bits of the books are still activated, the alarm of the gate will be alerted when the books are passing through the gate. If the EAS bits of the tag is not deactivated by the reader, the alarm of the gate will be alerted when the books are passing through the gate.

The module using for the security gate system is also tested by SIRIM dan certified by MCMC.

      

If you want to request the technical paper, please contact to us via sales@lemonjar.com.my.

HF RFID Security Gate System

The RFID security gate system is used to detect the EAS bit/ AFI mode of the tags within the books that are passing through the gates. If the EAS bits/ AFI mode of the books are still activated, the alarm of the gate will be alerted when the books are passing through the gate.

The security gate is adopted acrylic and metal plate material, integrated reader and three-dimension intelligent controller with high performance and power. It can read label in three-dimension direction and support AFI and EAS modes, with people counter inside this model can be used widely for protection of library, files room, clothes store, warehouse and personnel management etc.

   Model: ETE-5541

Model: ETE-RFID-F81

Function features: –

  • Transparency: Adopted imported acrylic and metal plate material.
  • Compatibility: Compatible with the electronic labels of other suppliers under ISO/IEC15693 and ISO18000-3 standard.
  • Stability: Adopted software control technology and good stability.
  • Sensitivity: Sensitive alarm, security and reliable, no fault alarm.
  • Counting function: embedded people counter inside.
  • Linkage: Linked management together with access control and monitor systems.
  • Installation ways: embedded, cutting, trunking, base plate.
  • Controllability: embedded optic-acoustic alarm inside, adjustable volume, remote controller to operate.
  • Exceptional tag discrimination & wide-aisle detection capability.
  • Slim, unobtrusive, impact-resistant & highly durable.
  • Great flexibility – fits easily into areas that are too small for conventional systems
  • Rugged & durable – impact resistant thermoplastic & stainless steel end caps

Model: ETE-5541 and ETE-RFID-F81

Items Description
Material   Acrylic and metal plate material
Operating Frequency   13.56Mhz, under standard of ISO 15693 and ISO 18000-3.
Scanning Methodology AFI, EAS, DSFID.
Working Mode Offline or Online
Alarm indication optic-acoustic alarm
Interface USB, RS232,RJ45
Power AC220V, 50-60Hz
Working temperature -10c- +50c
Power Consumption <30w
Detection range single lane: 80-100cm, double lane; 160-200cm
Size 1500mm x 450mm x 178mm (ETE-5541), 1750mm x 685mm x 190mm (ETE-RFID-F81)
Software SDK Software and Application Software Included

Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info via sales@lemonjar.com.my.

Library SelfCheck Kiosk (2021 New Model support OKU!)

Model: ETE-SK360UHF for UHF RFID

Model: ETE-SK360HF for HF RFID

The Library Selfcheck Kiosk comes with 2 models: RFID-only (HF or UHF) and Hybrid (EM and UHF RFID or EM and HF RFID), is a self-service machine where user can interact with the the library system for circulation activities. Our Selfcheck Kiosk is ready and come with the Selfcheck User Software, Staff Interaction System (Administration Staff Module) and the Middleware where user can borrow, return and renew books and collection to the library by themselves in an easy and friendly user interface. With the integrated technology comprising of EM and RFID (HF or UHF) on different models, the Selfcheck Kiosk helps libraries to ease the circulation workload and at the same time to improve the productivity and customer services. In every transaction, the Selfcheck Kiosk will snap the patron’s image automatically for security and accuracy purposes. Every transaction will be stored in the database and providing accuracy and conveniences information to make sure the books and collections are checked out and return correctly. The entire activity of the kiosk will be recorded and store into the database for reports & statistics purposes. These records can be generated according to desired hour, day, month or year.

Selfcheck Kiosk RFID-only (HF or UHF) – Selfcheck Kiosk RFID-only comes with RFID reader/ writer is suitable for libraries that operating in RFID-mode only. The RFID reader is configurable for UHF or HF RFID tags. Every circulation process are performed by reading to the RFID tags that is placed on the book via the RFID reader (need not barcode scanning) through the Selfcheck User Interface with the ILS via the middleware and activate/ deactivate the EAS bit (security bit) of the books and collections with the RFID reader/ writer, and this RFID only automation should be paired with RFID security gate. Please find more information of the RFID security gate in the same chapter.

Technical Specification of the Self Check Kiosk RFID only: –

Description ETE-SK360UHF ETE-SK360HF Remarks
Software: Staff Interaction System Come with hardware, no extra cost needed.
Software: Selfcheck Kiosk User Interface Come with hardware, no extra cost needed.
Software: Selfcheck Middle (SIP2/ NCIP) Come with hardware, no extra cost needed.
RFID Reader

For UHF, Module M2800 is used.

For HF, Tagsys Medio P200-LSA4 is used.

Patron Card Reader

By default, 2D barcode scanner is provided.

MIFARE Reader is optional, extra cost is needed.

Thermal Receipt Printer

By default, 58mm thermal receipt printer is used.

80mm thermal receipt printer is optional, extra cost is needed.

Touch Screen Monitor 21.5” multitouch screen monitor.
CPU Specification Intel i5 or AMD Ryzen5, DDR4 8GB RAM, SSD 480GB, Windows 10.
Built-in Camera
OKU features The kiosk able to level up to 1625mm (at the top of the monitor screen). And able to lower down to 1322mm, a suitable height for a wheelchair user to use the machine.

The new model of RFID Kiosk is supported OKU. User could press the button to lower the operating touch screen monitor, even if you are using wheel chair.

We are using RFID module which is tested and certified by SIRIM and MCMC Malaysia.

  

Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info via sales@lemonjar.com.my.

UHF RFID HANDHELD STOCK-TAKE READER

Model: ETE-RF33ST

      

The UHF RFID Handheld Stock-Take Reader (Model No: ETE-RF33ST) offers a high efficiency RFID reader engine for high RF sensitivity and able to achieve greater accuracy, higher throughput while providing a longer reading range to the tags. It is an industrial rugged model offering handheld and ‘gun-style’ reader mainly for intensive tasks for libraries in its stock-take/ inventory checking on books and collections.

The handheld reader is able to record the scanned accession numbers into a text file (.txt format). You can email the text file to your inbox. The text file can submit to Inventory Module of Library Management System to check the overall books’ status, such as on-shelf, checked out, lost, damaged, withdrawn, not for loan and etc.

The result is tested with KOHA ILS. Please contact to us for more info.

Other than checking for inventory status, this ETE-RF33ST is able to search the book by inserting the accession number. If the accession number if found, a notification sound will alert you.

 

Features & Function

Compiled with UHF reader module, the maximum read distance of up to 10m, within the effective range of up to 500 electronic tags per second.

Ergonomically designed. Industrial IP64 rated and 1.6 m anti-drop. Stable and reliable quality. Soft material around the handle offers a comfortable grip.

Support a variety of wireless communications protocol such as WIFI and Bluetooth.

Powerful hardware configurations to ensure applications like massive data collection, 3D real-time display can be operated smoothly.

Android 6.0 OS, keep optimizing and updating.

Pistol type hot-swappable battery system makes backup battery more convenient to be restored, so that the operating time is longer. (extra batteries are available).

Equipped with self-developed Impinj R2000 chipset, offering the best performance and excellent multi-tag identification ability in the industry.

This equipment is tested and certified by SIRIM and MCMC.

Other Specifications

  1. Packing List: 550 x 400 x 150 mm, 3.0kg

What’s in the box?

A ETE-RF33ST Handheld Reader, 2 Battery, A Battery Charger, A USB Cable, A Hand Lanyard, SDK DVD Media.

Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info via sales@lemonjar.com.my.

BOOKDROP

Model: ETE-RF500BDW (Wall Mounted Bookdrop, UHF RFID or HF RFID only) – able to add in Sensitizer module.

Model: ETE-RF505SBD (Mobile Standalone Bookdrop, UHF RFID or HF RFID only)

We are providing a full solution of bookdrop for library, there are Wall Mounted Bookdrop and Mobile Standalone Bookdrop. This bookdrop is able to operate 24/7 to receive the books from the patrons and it can be linked with the library system via our Middleware (SIP2 or NCIP). These bookdrops can be divided also into RFID model and Barcode model to suit the requirement of the user.

We also providing Mobile Standalone Bookdrop, the bookdrop is having a single bin to collect the books, same bin as the Wall Mounted Bookdrop. Each bin is able to collect 150 – 200 books. The functions of this bookdrop is same as Wall Mounted Bookdrop, except it can only carry single bin. The advantage of having this bookdrop is can place at anywhere and easy for relocation.

General Design and Outlook

  • Enclosure: 2.0mm mild steel epoxy powder coat finish (anti-rust)
  • Structure type: Floor standing and wall-mounted
  • Appearance: Glossy design with customizable design

Note: We will design the Appearance of the kiosk according to the desirable/ requirements of the client.

Bookdrop’s Technical Specification

Software: Supported by The Edge System and The SCWeb for library automation and operation, all rights reserved to Lemonjar Software Media Sdn. Bhd. Please contact us for more info via sales@lemonjar.com.my.

The RFID Module is tested and certified by SIRIM and MCMC.